FK servis logo
Product catalogue
  • 3
    3
    Fire curtains

    Fire curtains separate fire compartments, slowing the spread of fire in a warehouse, production hall, shopping centre or car park for 15 to 120 minutes.

  • FK servis - Smoke barriers
    FK servis - Smoke barriers
    Smoke barriers

    Smoke barriers divide a space into several smaller smoke zones. These are then easier to ventilate using a smoke and heat exhaust ventilation system.

  • Smoke and heat exhaust ventilation
    Smoke and heat exhaust ventilation
    Smoke ventilation

    Smoke and heat exhaust ventilation minimises property damage, makes it easier for firefighters to intervene and gives people enough time to leave the building safely.

  • Louvre windows and rooflights
    Louvre windows and rooflights
    Louvre windows and rooflights

    Louvre windows certified to standard 12101-2, not just for smoke and heat exhaust ventilation systems, but also for smoke and heat exhaust ventilation of protected escape routes.

  • Electromobility
    Electromobility
    Electromobility

    Systems and equipment for limiting the spread of electric vehicle fires, especially in public and private multi-storey car parks.

  • Daily ventilation 1
    Daily ventilation 1
    Natural ventilation

    Natural ventilation systems ensure a steady flow of fresh air, removing heat and moisture. Even fully automatically.

  • Home
  • Products
  • DXD 300-K-BSY+ HS

DXD 300-K-BSY+ HS

EXTREMELY POWERFUL RACK AND PINION DRIVE
Category:

A push force of 3000 N and direct control via a 230 V power supply: the DXD 300-K-BSY+ is our high-performance drive. With integrated BSY+ synchronised electronics, you can operate up to four drives simultaneously.

DXD 300-K-BSY+ HS
DXD 300-K-BSY+ HS - Different versions
DXD 300-K-BSY+ HS - OT version

Features

  • Can be used for smoke exhaust openings, D+H Euro SHEV to EN 12101-2, and for daily ventilation.
  • With an integrated BSY+ motor and microprocessor-controlled synchronised electronics.
  • Direct control via 230 V AC
  • High-speed function (HS) for exceptionally fast window opening in the event of fire (SHEV).
  • Up to 4 drives possible in one synchronous group
  • Groove in the drive tube for flexible installation and stroke configuration
  • Cables can be routed from above or below
  • Programmable drive functions and various drive parameters
  • Travel speed in the CLOSE direction reduces to 5 mm/s (passive closing edge protection)
  • Timed reversing when an obstacle is detected in the CLOSE direction (active closing edge protection).
  • Available in any RAL shade
  • Can be used for practically all types of window openings
  • The drive is suitable for surface mounting on the window sash or frame
  • Thanks to universal brackets, the drive is compatible with almost all available types of system profiles incl. Aluprof, Colt, Gutmann, Heroal, Jet-Brakel, Raico, Reynaers, Sapa, Schüco, Skandinaviska, Technal, Wicona

Gallery

DXD 300-K-BSY+ HS - Dimensions
DXD 300-K-BSY+ HS - Dimensions (PNG, ~734 KB)
DXD 300-K-BSY+ HS - Force diagram
DXD 300-K-BSY+ HS - Force diagram (PNG, ~434 KB)
DXD 300-K-BSY+ HS - Surface mounting on a top-hung roof window opening outwards
DXD 300-K-BSY+ HS - Surface mounting on a top-hung roof window opening outwards (JPG, ~373 KB)

Downloads

Technical data

DXD 300-K-BSY+ HS
Power supply 230 V AC / +10 % … -15 %
Input frequency 50 Hz
Power 140 W / 175 VA
Duty cycle 30 % (ON: 3 min. / OFF: 7 min.)
Push force 3 000 N
Pull force 2 000 N
Nominal locking force ** 2 800 N
Service life 20 000 double strokes *
Stroke 500 - 1 500 mm
Opening speed 7.1 mm/s
Opening speed (HS*****) 17 mm/s
Closing speed 7.1 mm/s
Protection rating IP 64
Emission sound pressure level LpA ≤ 70 dB(A)
Temperature range -15 °C (-5 °C ***) ... +75 °C
Fire resistance B300 (30 min / 300 °C)
Material aluminium / polycarbonate
Surface finish powder coating
Colour white aluminium (~ RAL 9006)
Connection 2.5 m silicone cable
W x H x D 706 - 1 706**** x 131 x 88 mm
Weight -
* Consult vertical use with a specialist from our company.
** Depending on the anchoring method.
*** In accordance with VdS 2580.
**** Depending on the stroke length.
***** Additional function for higher speed.

Optional extras

  • HS “High Speed”
    In smoke ventilation mode, the high-speed function is used to reach the defined end position reliably within 60 s. In daily ventilation mode the drive runs quietly and quickly, as usual.
  • Function programming
    The option of configuring drive parameters (e.g. the stroke) individually using software and the related service tools, for drives fitted with PLP, BSY or BSY+ electronics.
  • BSY+ (drive synchronisation)
    BSY+ enables communication and synchronisation between different components in a window. For example, between chain drives in synchronous operation or between window drives and locking drives (e.g. FRA 11 BSY+ or VLD-BSY+).
  • BRV signal
    Confirmation from the drive, via the control cable, that the drive has fully extended or retracted. When used with the AT 41 and ERM 44 modules, this signal is sent to the central building management system, to the modules themselves or to the locking drive. The BRV signal is not potential-free.
  • SGI signal (position reporting)
    In combination with the D+H servo plug-in unit SE 622 or the BSY gateway BSY-GW-024-010-U, drives can be controlled with precise positioning.
  • SKS (closing edge protection)
    An optional function that allows an “anti-trap” safety edge or a presence detector to be connected directly to the drive (terminating resistor 5.6 kΩ).
  • Acoustic signal (corresponding to the protection class)
    AS2 corresponds to “protection class 2” of the ZVEI risk assessment by means of an acoustic warning signal in the “CLOSED” running direction. AS3 corresponds to “protection class 3” of the ZVEI risk assessment: in addition to AS2, it stops the drive for 11 s with a remaining stroke of 28 mm.
  • End position signal (OPEN / CLOSED)
    Feedback from the drive via an integrated potential-free switching contact. It is given when the chain drive or linear drive has fully extended or retracted.
  • WS (swimming pool use)
    Available as an optional extra for linear drives to make them suitable for use in swimming pools. The drive is fitted with an A4 stainless steel rack and pinion, an A4 eye and a gearbox with a hardened stainless steel pinion.
  • W (outdoor use)
    Available as an optional extra for linear drives to make them suitable for outdoor use. The drive is fitted with a vent valve (depending on the installation), a protective coating against condensation on the electronics and a gearbox with a hardened stainless steel pinion.

Certificates and approvals

  • EN 12101-2
  • Dekra
WE'RE HAPPY TO HELP

Need more information?

Contact our sales team by phone at +420 312 672 903 or by e-mail at [email protected].